|
|
| Product Categories
Dual cure
& (B-stageable)
|
|
DP-M8310S
Description:
Dual cure system, initial thermal cure gives a soft
wax-like product, secondary UV cure gives hard rigid
system that can be sanded, epoxide based product, no
solvents in formulation, useful for mold-making and
investing, burns off completely if desired
|
|
|
DP-F7375D
Description: Dual cure epoxide system, thixotropic, initial UV cure followed by secondary thermal cure at 135-165
oC, excellent for bonding fiberglass, moisture resistant
|
|
|
DP-H1500T
Description: Dual cure system, low viscosity, UV curable epoxide, secondary thermal cure in shadow areas
at approximately 135-165 oC. Lower secondary temperature curing versions
available |
|
|
DP-DC0182
Description: Dual cure system, low viscosity,
UV curable epoxide, secondary thermal cure in shadow
areas at 100+ Centigrade, Shore D in UV cured area >80,
shadow curing in non-exposed area, good tensile properties
for rigid system. Other formulations can be prepared
with UV/thermal dual cure, no solvents in formulation
(100% non-volatile), extremely low shrinkage, superior
adhesion to a variety of substrates |
|
|
General
Information and Services: Dual cure systems can be
prepared from most of our 100% solids UV curable
epoxides. Please contact us for further information as
assistance |
|
|
|
